The requirements of the operators of the cup-making machine and the sheet metal-Cangzhou jinlong plastic machinery factory
CURRENT POSITION:HOME > NEWS > Industry information >
NEWS
CATEGORY
HOT PRODUCTS

The requirements of the operators of the cup-making machine and the sheet metal

2020-01-08 17:25:13

Optional Excerpt:

The cup-making machine is mainly composed of three parts. One end of the sheet transfer mechanism is arranged in the fuselage at the exit of the cup-making machine....

The cup-making machine is mainly composed of three parts. One end of the sheet transfer mechanism is arranged in the fuselage at the exit of the cup-making machine, and the other end is connected with the fuselage.The material transmission mechanism is composed of a chain conveyor belt and a chain seat, which is connected with the body through the sliding mechanism of the transmission mechanism.The sliding mechanism comprises a chain conveyor belt and a sliding guide on the fuselage.Therefore, the structure of the cup machine belongs to the type of interlock, without any part will not be able to operate normally.

Cup-making machine is actually a kind of mechanical equipment for the production and processing of disposable plastic cups, disposable tableware and other plastic products. It is seldom seen in People's Daily life, but the cutlery and tableware it produces are closely related to our daily life.In our daily life, disposable cutlery and cutlery can be seen everywhere, and can be used in airports, railway stations, restaurants, meeting rooms and other public places.

In addition to the equipment itself, to many problems are caused by the operation of the equipment operators, operators if improper operation, in order to timely maintenance and maintenance, will lead to equipment failure.So the operational knowledge that operators need to have.For sheet metal machine, sheet metal machine equipment production operators, is the maintenance of equipment, prolong the service life of sheet metal machine.The main measures to reduce the cost of plastic products and increase the economic benefit are to reduce the maintenance times of sheet metal machine, to change the parts and to extend the working life of sheet metal machine.Want the product quality is good, the efficiency is high, guarantees the enterprise obtains the higher profit, the equipment is in the good condition for a long time to work is the basic condition.

A sheet machine operators, can save a lot of trouble and problems for the enterprise, the operators in the operation of equipment, can operate according to the rules, seriously responsible, is the maintenance of equipment.So, no matter the new operators, or the old operators, to memorize, understand the operating procedures of the machine, after the actual operation of the test, qualified to work.

Sheet machine can be used to make sheet of different materials, mainly used to make plastic sheet.Sheet metal is widely used in food, construction, medicine, chemical industry and other industries.The characteristics of deviation and are easy to operate, simple structure, high material utilization rate and so on.In the process of using the sheet metal machine, the operation is very stable, there is no vibration phenomenon, noise problem is almost no.Once encountered a large noise sheet machine, it means sheet machine problems, to immediately stop, troubleshooting to solve the problem.So, what causes the sheet metal machine noise too big?

I. motor parts

1. Severe wear or low machining accuracy of the rolling bearing used for the rotor shaft;2. Bending of rotor shaft.

Two, V belt drive part

1. The two ends of the transmission shaft are not fixed firmly or the gap is too large;2. Low manufacturing precision of belt wheel;3. Unqualified installation.

Third, gear transmission working part

1. Low gear precision and large error;2, gear mesh is not good;3. Insufficient lubricating oil;4. The bearing shaft is badly worn.