Failure and installation of cup-making machine-Cangzhou jinlong plastic machinery factory

Failure and installation of cup-making machine

2020-01-08 17:25:53

Optional Excerpt:

For the cup machine simple fault that is for each part of the lubrication and fastening....

For the cup machine simple fault that is for each part of the lubrication and fastening, as long as the daily parts to add lubricant and check whether the screw fastener loose can be solved.In the cup machine is prone to trouble is the krumble rolling machine, this part is the key, the pressure can not be added too much, for ultrasonic welding machine, ultrasonic frequency should be adjusted, the pressure should not be too big, and please try to maintain the pressure balance.Now the mainland of China or began to be popular, but the performance of those machines is very stable, the general electrical failure is more, in a word, no matter what kind of cup machine, please pay attention to the time of each part, each rotating table and the stability of the platform.

In the process of installation and use of plastic cup making machine, in order to ensure that the drive in the normal temperature operation, attention should be paid to the connection line, to ensure that the correct signal can be connected, to ensure the normal operation of the servo;As the use of different machines is not the same, in order to ensure the normal operation of the servo, to set the correct servo control mode.Match the data correctly according to the actual operation results, do not set the electronic positioning and gear operation ratio data in the case of servo and motor operation.To prevent interference and shock, make sure the motor drive interface is grounded to properly connect the drive to the housing.As far as possible, the shielding wire is selected to connect to the interface end of the shell.In order to prevent signal interference, interference of coded signal source and control signal, it is necessary to keep enough distance as far as possible.

The cup as a water, wine and other liquid utensils, is a necessity of life.Especially in such a populous country as China, it is no longer possible to meet people's needs only by making cups by hand. In order to speed up work efficiency and free hands, the cup machine is born and bred.A cup maker, as the name implies, is a machine that makes cups.The original purpose of the cup-making machine was to speed up the production of cups.The structure of the cup-making machine is simple, mainly composed of three parts, including fuselage, cup-making device and sheet conveyor.With the development of economy, the exterior design of the cup is becoming more and more exquisite. People not only take the cup as a drinking utensil, but also give it as a gift to relatives and friends.

China has a population of 1.3 billion, as a necessity of life, the domestic market can be imagined.Therefore, cup machine in the domestic future is also very bright.